Bells of Steel Buzz-Saw Bench with Leg Extension/Curl review

This Buzz-Saw package changes the base bench in a concrete way: the exact U.S. selector option, SKU BSAW-ADP-LELC-SET, includes the bench, the model-matched attachment adapter, and Bells of Steel’s Leg Extension/Leg Curl Attachment. The dedicated Leg Roller and Preacher Curl attachments are separate options, not included by implication. That distinction makes this review about a specific exercise station, not every package offered under the shared Buzz-Saw product handle.

What the leg-developer bundle adds

The added multi-roller assembly brings leg-extension and leg-curl work to the bench platform; the current product page presents it as a leg-isolation add-on. The exact product photo for this variant shows the developer mounted at the front of the bench, including its roller pads and weight sleeve. The adapter is explicitly part of the SKU. Bells says compatible bench attachments can be loaded with up to 200 lb of weights. That accessory statement is separate from the bench page’s 1,000-lb claim, and the source does not explain whether that attachment number applies identically to every piece or how the two loads should be interpreted together. Confirm the exact load limit, weight-plate fit and usage directions with the maker before using it.

This package is distinct from “Bench + Leg Roller Attachment + Adapter.” The extension/curl attachment has several pads and a loading point for leg-isolation work; the separate Leg Roller is the configuration Bells specifically describes as anchoring the legs for decline work. The imagery, selector names and accessory page show these as different components. The extension/curl pads should not be represented as a documented decline restraint for this exact bundle. If an included decline anchor is non-negotiable, choose one of the SKUs whose list includes the dedicated Leg Roller.

The bench remains a full adjustable platform

The underlying frame is the same Buzz-Saw bench described by Bells as having eight back-pad positions and three seat angles, for 24 combinations. The written FAQ lists 88°, 75°, 65°, 55°, 45°, 30°, 0° flat and -10° decline. The maker separately states that the frame has a 1,000-lb capacity at each back angle, and describes 11-gauge steel and a 2.4-inch pad. These are manufacturer claims, not test results. The page’s product illustration shows angle markings that do not align exactly with its written FAQ list, so check the current labels and operating instructions rather than treating the photo as the final angle chart.

The bench’s wider range can suit flat, incline and decline training, while the attached developer adds leg isolation. It does not mean every combination of seat, back and attachment is cleared for every exercise. Follow the manufacturer’s assembly and exercise instructions, and ask Bells to clarify the 1,000-lb figure’s load convention. The 200-lb attachment statement is not an alternative bench rating and should not be combined casually with it.

Movement and room planning are separate

Bells lists wheels and a front handle for moving the bench, plus upright storage with an integrated stopper. It warns that the storage floor must be level to avoid a fall. The source does not confirm that the extension/curl assembly can remain fitted while the bench stands upright, so reserve room for a detached attachment and treat the vertical-storage statement as applying to the frame unless Bells says otherwise. The bench page does not publish the assembly’s own size, a combined working footprint or an upright storage envelope.

There is no exact bench footprint in the product page or the bench manual. A general instruction in the manual to leave at least two feet of free space is clearance guidance, not a dimension. The page gives conflicting bench weights—94.3 lb in one section and about 98 lb in its FAQ—and does not resolve which applies. A roughly 18-inch height appears in the FAQ, but no precise flat height is established. Measure the training and storage zones directly rather than estimating from the image.

Who may prefer this configuration?

The package is most relevant to someone who plans to use the leg developer regularly and wants it supplied alongside a heavy-duty adjustable bench. It may reduce the need for a separate small leg-isolation unit, but that space comparison is an editorial inference, not a published dimension. If you will use only bench pressing or want a decline leg anchor more than leg extension/curl work, a different selector option may better fit the task. If preacher curls are also part of the plan, the complete package adds a third distinct attachment; the two-accessory lower-body bundle instead includes the Leg Roller but not preacher equipment.

Assembly, loading and storage all deserve a package-level check. The downloadable manual linked from the product page is for the Buzz-Saw bench frame, not a substitute for exact accessory instructions. Bells says its attachments and adapters are only guaranteed to fit its Buzz-Saw and Hero benches, so do not extrapolate fit to another brand’s bench. The page states a limited lifetime frame warranty and 180-day coverage for wheels and upholstery; check the current warranty wording for attachment pads and frame components.

This is a source-based assessment, not a hands-on review or a claim of owning, measuring or testing the bench. Before purchase, confirm SKU BSAW-ADP-LELC-SET, the adapter and developer parts, the exact attachment load guidance, available plate fit, and whether the accessory must be removed for storage. Review Bells of Steel’s Buzz-Saw package selector, the Bench Attachments page and the bench assembly instructions for the current exact details.