Bells of Steel Buzz-Saw Bench with Leg Extension/Curl and Leg Roller review

This is the Buzz-Saw lower-body combination rather than the bench-only, single-accessory or all-in package. The exact U.S. option, SKU BSAW-ADP-LGRL-LELC-SET, includes a Buzz-Saw adjustable bench, its model-matched adapter, the Leg Extension/Leg Curl Attachment, and a separate Leg Roller Attachment. The exact variant-specific product image makes the distinction visible: the developer is mounted on the bench, while the dedicated leg roller is shown as a second component. The preacher-curl attachment is not named in this SKU.

Two attachments, two different purposes

The leg developer adds the advertised extension and curl work. The Leg Roller is a separate support attachment that Bells describes as anchoring the legs for decline work. Treating these as two pieces matters: the combined bundle offers both functions, while the Leg Extension/Curl-only option does not have the same documented decline anchor, and the Leg Roller-only bundle does not include the developer. If arm isolation is also a goal, the complete attachment bundle adds the separately named preacher-curl apparatus; the BSAW-ADP-LGRL-LELC-SET option does not.

The maker says compatible bench attachments can accept up to 200 lb of weights. That statement is distinct from the Buzz-Saw frame’s 1,000-lb angle rating. The source does not define the rating convention or clarify which limit applies to each selected component, so treat neither as a combined capacity. Confirm the exact accessory, plate fit and load guidance with Bells. The product images do not establish loading safety or a measured training area.

Position range belongs to the bench frame

The underlying bench is described with 24 arrangements: eight back angles and three seat angles. Bells’ FAQ lists 88°, 75°, 65°, 55°, 45°, 30°, flat and -10° decline. That provides a documented FID range as the starting point, and the dedicated roller adds the stated leg anchor for decline work. The product image’s printed angle numerals do not match the written list exactly; use the current manufacturer instructions and physical adjustment marks rather than relying on the promotional visual alone. The three seat positions are counted by the maker, but their exact angles are not published in the sources checked.

Bells states that the bench capacity is 1,000 lb at every back angle. The page also describes 11-gauge steel and a 2.4-inch-thick textured pad. Those are manufacturer statements, not tests. They make this package relevant to a buyer who needs the reported rating in flat, incline and decline positions, but the page does not say whether user mass is counted or how use of a loaded attachment changes the rating. If this interpretation is essential, ask the manufacturer rather than assuming that the frame and accessories share one number.

Plan for moving the bench and storing parts

Wheels and a handle help reposition the frame, and Bells describes upright storage with a built-in stopper. It also warns that the floor must be level when the bench is stored vertically. The product page does not confirm storage with both lower-body attachments installed; plan for the separate pieces to come off and occupy their own storage space unless Bells approves another arrangement. Two accessories increase the setup footprint while in use, but no exact bench or accessory dimensions are supplied.

The source contains a weight conflict: 94.3 lb (42.8 kg) in one details section and about 98 lb (44.5 kg) in an FAQ. Neither is selected as a definitive value. The FAQ’s roughly 18-inch bench height is approximate and does not establish exact flat height. No length, width, area or pad-gap measurement appears in the checked product page or bench manual. The manual’s two feet of free space is an instruction for clearance, not a calculated base size. Measure the room and route, then set aside separate storage room for both attachments.

Assembly and compatibility deserve bundle-level checking

The linked PDF is the Buzz-Saw bench assembly manual. It says to set the product on a flat surface, leave at least two feet of free space, keep fasteners tightened, and anchor equipment where required or possible. It is not a substitute for exact attachment instructions. Bells says its Bench Attachments and adapters are guaranteed only for its Buzz-Saw and Hero bench hosts; this bundle includes the Buzz-Saw-specific adapter. Do not infer third-party fit from a similar frame size. Confirm that all pins, hardware, leg-development pieces and roller parts arrive, then follow the current assembly and inspection steps.

Who should choose the two-accessory package?

It suits a buyer with a genuine plan for both leg extension/curl work and a dedicated decline anchor who wants those parts supplied with one adjustable bench. It is a poorer choice if one attachment will sit unused, if a preacher curl pad is the missing function, or if compact vertical storage must include everything assembled. The all-in option covers preacher work too; the leg-roller-only version is simpler for decline support; the leg-developer-only package is focused on isolation work. These are materially different functional offers under one family name, not finish variants.

This is an evidence-based desk assessment, not a report of personal use, measurement, ownership or testing. Bells lists limited lifetime frame coverage and 180-day coverage for wheels and upholstery; verify terms for all attachment parts. Before ordering, match SKU BSAW-ADP-LGRL-LELC-SET, confirm the two separate accessories and adapter in the seller’s package, and ask about the precise load limits. Primary references are Bells of Steel’s Buzz-Saw product selector, the Bench Attachments page and the bench assembly instructions.